Excessive cleaning time (over one hour) (See "Excessive Cleaning
|
|
Time" paragraph below) |
|
A
defective primary condensing unit |
|
Tanks in poor condition - not suitable for retrofitting |
|
(see
Used Equipment
list and/or our
EE Series
specs if your unit needs replacing) |
|
Leaking seals |
|
Pitted painted surfaces |
|
Primary cooling coils - not able to maintain pressure |
|
Defective gauges, controls, safeties and switches on the basic
original unit |
|
Prior modifications made to the unit |
|
Painting the entire unit with new paint or specialty coatings
(available upon |
|
request as an extra cost option |
|
Shipping Charges- Customer is responsible for shipping charges to
and from |
|
Ultronix facility. Retrofit can be done on-site if
shipping unit is no possible. |
| |
EXCESSIVE CLEANING TIME
Quotations are developed on the basis that the unit to be retrofitted is free of
excessive buildup in the tank and is relatively clean (we include one (1) hour
of cleaning time in our quote). If upon inspection at our facility it is
determined that the condition of the unit is otherwise, customer will be
notified and advised of the additional charges (time and materials) to clean the
unit. (Customer to be notified by fax - with Ultronix awaiting authorization to
proceed.)
Trouble signs, which normally result in additional clean-up time and charges,
include rusted tanks (could be the result of an acid condition, which is
trouble), contamination/build-up in the bottom of the tank or on the heater
elements, and leakage (which has pitted painted surfaces). Please inspect your
unit prior to shipment to ensure that your unit is ready for retrofitting.
*This
process does not involve the reconditioning of the basic unit
(reconditioning can be quoted on a time and materials basis).
**Upon
inspection, Ultronix will advise customer of equipment condition and await
authorization to repair/replace worn or defective parts.